37_SP30 series
Global
點擊圖片放大商品名稱:
SP30 ABS (SP3010 Shielded/SP3015 Unshielded)
更多商品
KP1810 ABS Unshielded&KC3020 Unshielded
RQ Ring Type
RO-05 front surface
#5mm (detection distance) NPN.NO RO-05N1NPN.NC RO-05N2PNP.NO RO-05P1PNP.NC RO-05P2The aboves are three-wires NPN.NO RO-05N1KNPN.NC RO-05N2KPNP.NO RO-05P1KPNP.NC RO-05P2KThe aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name: RO05 proximity switch Take RO05-N1 as an example R: Brand Definition O: Square appearance-integrated LED light area at the rear 05: #Detection distance #5mm N1: NPN blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through RO05-N1 and then act. Current: 300mA Supply voltage: 10-30V DC Line length: 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 5mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
RK-05 front surface
#5mm (detection distance) NPN.NO RK-05N1NPN.NC RK-05N2PNP.NO RK-05P1PNP.NC RK-05P2 The aboves are three-wires NPN.NO RK-05N1KNPN.NC RK-05N2KPNP.NO RK-05P1KPNP.NC RK-05P2K The aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name: RK-05 proximity switch Take RK-05N1 as an example R: Brand Definition K: Square Appearance - LED Light Zone at the Tail 05: #Detection distance #5mm N1: NPN blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through RK-05N1 and then act. Current: 300mA Supply voltage: 10-30V DC Line length: 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 5mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
SN04 front surface
#4mm (detection distance) NPN.NO SN04-NNPN.NC SN04-N2PNP.NO SN04-PPNP.NC SN04-P2 The aboves are three-wires NPN.NO SN04-NKNPN.NC SN04-N2KPNP.NO SN04-PKPNP.NC SN04-P2K The aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name: SN04 proximity switch Take SN04-N as an example S: brand definition N: square appearance 04: #Detection distance #4mm N: NPN blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through SN04-N and then act. Current: 300mA Supply voltage: 10-30V DC Line length: 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 4mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
SND04 top surface
#4mm (detection distance) NPN.NO SND04-N1NPN.NC SND04-N2PNP.NO SND04-P1PNP.NC SND04-P2 The aboves are three-wires NPN.NO SND04-NKNPN.NC SND04-N2KPNP.NO SND04-PKPNP.NC SND04-P2K The aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name: SND04 proximity switch Take SND04-N1 as an example S: Brand Definition N: Square appearance D: Top surface 04: #Detection distance #4mm N1: NPN blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through SND04-N1 and then act. Current: 300mA Supply voltage: 10-30V DC Line length: 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 4mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
RND04 top surface
#4mm (detection distance) NPN.NO RND04-N1NPN.NC RND04-N2PNP.NO RND04-P1PNP.NC RND04-P2 The aboves are three-wires NPN.NO RND04-N1KNPN.NC RND04-N2KPNP.NO RND04-P1KPNP.NC RND04-P2K The aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name: RND04 proximity switch Take RND04-N1 as an example R: Brand Definition N: square appearance D: top surface 04: #Detection distance #4mm N1: NPN blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through RND04-N1 and then act. Current: 300mA Supply voltage: 10-30V DC Line length: 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 4mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
SE05 front surface
#5mm (detection distance) NPN.NO SE-05NNPN.NC SE-05N2PNP.NO SE-05PPNP.NC SE-05P2 The aboves are three-wires NPN.NO SE-05NKNPN.NC SE-05N2KPNP.NO SE-05PKPNP.NC SE-05P2K The aboves are M12 connector 15cm wire type Brand: TW ROKO® Tech. Name:SE05 Proximity switch Take SE-05N as an example S: brand definition E: Square appearance 05: #Detection distance #5mm N NPN Blue wire negative power 0V, brown wire positive power 24V, (black wire is connected to +, negative power 0V is connected to -) ex, DC24V RELAY pin 13 is connected to negative power 0V, pin 14 is connected to the black wire to receive signals through SE05-N and then action. Current 300mA Supply voltage 10-30V DC Line length 2 meters PBT material shell High Brightness LED NPN NO = When the metal object enters the sensing area (within 5mm), the output signal will be turned from open to closed (commonly known as A contact), and the LED light will light up. What Is a Proximity Sensor? A proximity sensor is an intelligent sensor that can detect the presence of objects within its vicinity without any actual physical contact. Proximity sensors, which are often used in collision warning and collision avoidance systems, have the ability to detect the presence of a target within a defined range. A proximity sensor might use, sound, light, infrared radiation (IR) or electromagnetic fields to detect a target. SOURCE: https://reurl.cc/OAODo3 ------------------------------------------------------------------------------------------------------------------------ How does a proximity sensor works? A proximity sensor is a non-contact sensor that detects the presence of an object (often referred to as the “target”) when the target enters the sensor's field. Depending on the type of proximity sensor, sound, light, infrared radiation (IR), or electromagnetic fields may be utilized by the sensor to detect a target. SOURCE: https://reurl.cc/55maXR ------------------------------------------------------------------------------------------------------------------------ Where is a proximity sensor used? It is also used for part detection in an industrial conveyor system. Proximity sensors can also be found in consumer devices. In smartphones, proximity sensors are used to detect if a user is holding their phone near their face. They are also used as capacitive touch switches on consumer electronics products. SOURCE: https://reurl.cc/QLMnm5 ------------------------------------------------------------------------------------------------------------------------ Can proximity sensor measure distance? Distance sensors can measure distance from an object. Proximity sensors, on the other hand, are used to detect objects in a particular range without specifying how far away they are. This means that proximity sensors will be triggered by closer items that distance sensors would identify as 'out of range'. SOURCE: https://reurl.cc/VD9plb ------------------------------------------------------------------------------------------------------------------------ What are the types of proximity sensors? There are five types of proximity sensor, according with the non contact object detection method. Inductive Proximity Sensor.Optical Proximity Sensor.Capacitive Proximity Sensor.Magnetic Proximity Sensor.Ultrasonic proximity Sensor. ------------------------------------------------------------------------------------------------------------------------ We are committed to making machinery intelligent. Our products present the most convenient and long-lasting electronic products to overcome the environmental conditions of the factory. Over the past 21 years, we have kept pace with the times and never spared no effort in humanized design. # ROKO Electronic Technology Co., Ltd. officially started operation in May 2000. The main products are: #proximity switch, #photoelectric switch, #fiber amplifier, #timer, #counter, and #temperature controller, etc. Widely used in the field of #industrial automation, various mechanical equipment and #automatic production lines, play the role of automatic detection, counting, testing, protection and limit and position control, especially high-tech #computer numerical control machine tools (#CNC), Mechatronics equipment (Optomechatronics). In 2003, the ISO9000 quality assurance system was fully implemented, and the production process also passed the strict implementation of ISO9001: QA+QM, 2008 quality management system certification and a full range of CE certification.
